Samsung UE85S9ST - Manual (Page 16)

English - 16
✎ Turn the TV off to connect or disconnect a CI card.
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
• If you don’t insert the “CI or CI+ CARD”,
some channels will display the message
“Scrambled Signal”.
• The pairing information containing a
telephone number, the “CI or CI+ CARD”
ID the Host ID and other information will
be displayed in about 2~3 minutes. If
an error message is displayed, please
contact your service provider.
• When the configuration of channel information has finished, the message “Updating
Completed” is displayed, indicating the channel list is updated.
✎ NOTE
• You must obtain a “CI or CI+ CARD” from a local cable service provider.
• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since
dropping the “CI or CI+ CARD” may cause damage to it.
• Insert the “CI or CI+ CARD” in the direction marked on the card.
• The location of the COMMON INTERFACE slot may be different depending on
the model.
• “CI or CI+ CARD” is not supported in some countries and regions; check with
your authorized dealer.
• If you have any problems, please contact a service provider.
• Insert the “CI or CI+ CARD” that supports the current aerial settings. The
screen will be distorted or will not be seen.
Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)
[UHDS9-XH]BN68-05272F-02L16.indb 16 2013-10-31 2:25:21