Samsung UE85S9ST - Manual (Page 14)

English - 14
Universal Remote Setup
This TV has a universal remote control feature that lets you control cable boxes, Blu-
ray players, home theatres, and other third-party external devices connected to the TV
using the TV's remote control.
5 cm
Plug the cable into the TV IR connector and then point the transmitter at the other
end of the cable towards the external device's remote panel receiver. However, there
can' be any obstacles between the IR extension cable and the external device. The
presence of an obstacle will interfere with the transmission of the remote control signal.
Add the External Device
1. Turn on the external device you wish to set up universal remote function for and
then press SOURCE to bring up the Source screen.
2. Select Universal remote setup from the top of the screen. This initiates the
universal remote setup process.
3. Follow the on-screen instruction and set up the universal remote control. If it does
not work, set up the remote control by entering the model number manually.
SETUP
The initial setup dialog appears when the TV is first activated. Follow the on-screen
instructions to finish the initial setup process, including menu language choice, channel
scan, network connection, and more. At each step, either make a choice or skip the
step. Users can manually perform this process at a later time under the Screen Menu >
System > Setup menu.
✎ If you connect any device to HDMI1 before starting the installation, the Channel
Source will be changed to Set-top box automatically.
✎ If you do not want to select Set-top box, please select Aerial.
Password Change
Screen Menu > System > Change PIN
Change the TV's password.
1. Run Change PIN and then enter the current password in the password field. The
default password is “0-0-0-0”.
2. Enter a new password and then enter it again to confirm it. The password change
is complete.
✎ If you forget the PIN code, press the buttons in the following sequence which
resets the PIN to “0-0-0-0”:
For Standard Remote Control: In Standby mode:
MUTE → 8 → 2 → 4
→ POWER (On)
For Smart Touch Control: When the TV turns on: MUTE → Volume up →
RETURN → Volume down → RETURN → Volume up → RETURN
[UHDS9-XH]BN68-05272F-02L16.indb 14 2013-10-31 2:25:21