ACR Electronics Nauticast Y1-03-0211 User Manual
Page 41
Y1-03-0211 Rev D
37
m) Security Log
The Security Log is implemented to show the
“switched off” – times of the transponder.
In standard operation, this Log should not contain any entries.
3.5.2 Voyage Settings (User Password Protected)
Select the “Voyage Settings” – Sub Menu from the Main Menu with the cursor button [Up] &
[Down] or press No. 3 on the keyboard
NOTE: The default password from the factory is mentioned on your AIS display at the
protection foil. (see Appendix 7.3 for password information).
N 1
o
22' E 0
o
16' |1>0.10|2>1.30|3>1.80nm
************* Version Info *************
## # ### ### ### ## # # ###
# # # # # # # # # ## # #
#### # ## # ### #### ##### ##
# # # # # # # # # # ## #
# # # ### # # # # # # # ### #
Hardware: AIS Transponder Class A
Software: INLAND V2.0.S116.nnnn
SW Stamp: Month Day Year Date
Modem HW: Issue J SeCo:n
Modem SW: 01.10.nn
----------------------------------------
| | | | <-Back
N 1
o
27' E 0
o
20' |1>0.10|2>1.30|3>1.80nm
************* Security Log *************
....StartTime..............EndTime......
01/15/2001 03:11 until 01/15/2001 04:00
----------------------------------------
| | | | <-Back