ACR Electronics Nauticast Y1-03-0211 - Manual (Page 19)

Y1-03-0211 Rev D 15
3.1.1 Own Vessel Data
LAT:N 1°27.845'ExtSOG:34.6kn 05/26/06
LON:E 0°21.289'ExtCOG:173.0° 10:52:26
LAT: Latitude
LON: Longitude
Date:
The actual UTC - date (MM.DD.YY) and time (hh.mm.ss) are displayed on the top
right hand corner of this view.
IntGPS: 3D A/ ExtHDT:222° Reg6
IntGPS Indicates normal or differential mode of GPS position.
2D or 3D: Indicates the precision of the GPS result.
Indicates the used position source:
intGPS. = internal GNSS receiver
extGPS = external GNSS receiver (sensors)
A/B: (A or B) Indicates the last transmitting channel in use.
ExtHDT True Heading
Reg:
Indicates the actual region of own vessel‟s position. If no region number is displayed,
then the vessel is traveling on high sea and is outside a predefined region.
Message (SRM) Indication
LAT:N 1 o 27.845'ExtSOG:34.6kn *3S
Queued safety related messages, e.g. *3S are displayed in the date field (instead of the date) – in the above
example 3 Safety Related (3S) Messages are queued, and await viewing and handling (acknowledgement or
reply) in the Message Inbox History.
Alarm (ALR) and Text (TXT) Indication
IntGPS: 3D /B Reg6 ! 3A 2T
Queued alarms or messages, e.g. ! 3A 2T are displayed in the 3
rd
line – in the above example
3 (3A) Alarms and 2 (2T) Text Messages are in queue, and await viewing and handling (acknowledgement
and reaction).
BlueSign Indication
BlueSign: ON **RTA** AISMode: INLAND
The “BlueSign” indication is the status of the external “Blue Sign” - switch. The Blue Sign information will be
transmitted in the position message an indicated in this field.
„N/A‟ means no Blue Sign available (see chapter
3.5.4 f)! „OFF‟ Blue Sign is available and set to OFF. „ON‟ Blue Sign is activated!
RTA Indication
BlueSign: ON **RTA** AISMode: INLAND
The “RTA” indicates a received Requested Time of Arrival. The content of this message could be seen in the
Message Menu.
Inland Indication
BlueSign: ON **RTA** AISMode: INLAND
The AIS-Mode indicator shows the actual configured mode of the NAUTICAST. The NAUTICAST could be
used as INLAND AIS and as SOLAS Product.