Red Lion LEGEND - Manual (Page 17)

RATE SCALE MULTIPLIER (RATE SCM)
The Rate Scale Multiplier is used with the rate scale factor and rate conversion
factor to scale the rate display value for the proper units of measure. The scale
multipliers available are; X 1, X 0.1, X 0.01, X 1000, X 100, or X 10.
RATE CONVERSION FACTOR (RATE PER)
The Rate Conversion Factor is used to display the rate value in the proper time
units of measure, per second (X1), per minute (X60), or per hour (X3600) for the
desired time units for the Rate display.
DECIMAL POINT (DP)
There are six Decimal Point locations available for the Rate and Count displays.
The decimal point is programmed individually for the Rate and Count displays.
The Count Decimal Point will be the same for the Process and Total displays. The
decimal point location programmed for the Rate display will also be the same for
the Peak and Valley displays.
-15-