Red Lion LEGEND - Manual (Page 15)

PROGRAMMING MENUS
The programming menus are accessed when “Program Mode” is displayed in
the main display loop. All parameter values can be accessed from the Main
Programming Menus. Accessibility to the programming menus will depend on
the Program Disable Function setting (Refer to Front Panel Accessible Functions
with Program Disable section).
In the programming menus, pressing the down arrow key will scroll through all
the main menu options. From the main menu, a sub-menu is accessed by pressing
the SEL> key. In a sub-menu, the operator can view the parameter values that are
currently selected. To change a parameter value, the edit menu is accessed by
pressing the SEL> key. (Refer to Programming General Description section).
The Preset and Counter Load module can be accessed from any main
programming menu by pressing the PRS key. When exiting the preset and
counter load module, the operator will return to the last main menu that was being
viewed. When all parameter changes have been made, the operator can exit the
programming loop, from any main menu, by pressing the save all parameter values and return the operator to the last indication display that
was viewed. Shown are all of the main programming menus:
-13-