Vaisala HMP230 - Manual (Page 83)

HMP230 SERIES
M210225en-B User's Guide
77
9.8. Electromagnetic compatibility
HMP230 series transmitters fulfill the standard EN 61326-1:1997 +Am
1:1998, Electrical equipment for measurement, control and laboratory use -
EMC requirements; Industrial environment (Generic environment for HMP233
with low temperature sensor cable).
Test methods
Emission
Radiated emissions
CISPR16 class B (CISPR22 Class B)
Immunity
Electrostatic discharge (ESD)
EN/IEC 61000-4-2
EM field EN/IEC 61000-4-3
Industrial environment: 10 V/m
Generic environment: 3 V/m
EFT Burst EN/IEC 61000-4-4
Surge EN/IEC 61000-4-5
Conducted RF EN/IEC 61000-4-6
NOTE
These tests are valid with the following specified sensor
protections only.
Type: Sensor protection/notes:
HMP231 sintered filter (part no. 16452), PPS grid &
stainless steel netting (part no. 16720)
HMP233
high temperature (120
°
C) PPS grid & stainless steel netting
(part no. 16720)
low temperature (80
°
C) sintered filter (part no. 16452)
PPS grid & stainless steel netting
(part no. 16720)
HMP234 sintered filter (part no. 16452)
HMP235 sintered filter (part no. 16452), PPS grid &
stainless steel netting (part no. 16720)
HMP237 sintered filter (part no. 16452), PPS grid &
stainless steel netting (part no. 16720)
HMP238 sintered filter (part no. 16452)
Voltage proof, AC: DC supply (+ or -) to housing 250 VAC, 1 minute (300 k
Ω
and 15 nF parallel)