Vaisala HMP230 User Manual
Page 14
HMP230 SERIES
User's Guide
M210225en-B
8
tightening cone
sealing washer
fitting body nut
4. Mark both the fitting body and the nut hex.
A pen
fitting body
nut
5. Tighten the nut a further 30° (1/12 turn) or if you have a torque span-
ner tighten it with a torque of 80 ±10 Nm. NOTE: after detachment
the nut must be tightened without increased effort.
30°
6. The tightening cone of the fitting body has to be cleaned and greased
after every tenth detachment. Use high-vacuum grease (Down
Corning, Europe) or a similar grease.
clean cotton stick
tightening cone
sealing
washer
fitting body
The sealing washer has to be changed every time the fitting body is
detached.
See also other documents in the category Vaisala Humidifiers:
- Calibration of Digital Transmitters with HMI41 (36 pages)
- Calibration of Series HMDW2030 and HMP130 Transmitter with HMI41 (14 pages)
- Calibration of Series HMDW6070 and HMP140 Transmitter with HMI41 (30 pages)
- HM34 (30 pages)
- HM40 (47 pages)
- HM44 (52 pages)
- HM70 (83 pages)
- HMD40 (1 page)
- HMD60 (4 pages)
- HMD70 (18 pages)
- HMDW110 (62 pages)
- HMDW80 (51 pages)
- HMI41 (74 pages)
- HMP41 (72 pages)
- HMK15 (39 pages)
- HMM100 (71 pages)
- HMM105 (23 pages)
- HMM211 (42 pages)
- HMM212 (36 pages)
- HMM213 (52 pages)
- HMP140 (28 pages)
- HMP155 (84 pages)
- HMP228 (115 pages)
- HMP240 (130 pages)
- HMP260 (118 pages)
- HMP60 (71 pages)
- HMT100 (52 pages)
- HMT120 (87 pages)
- HMT130 (95 pages)
- HMT140 (76 pages)
- HMT310 (88 pages)
- HMT310 (105 pages)
- HMT330 (209 pages)
- HMT360 (97 pages)
- HMT360 (63 pages)
- HMT360N (110 pages)
- HMW40 (1 page)
- HMW90 (110 pages)
- SHM40 (68 pages)
- RDP100 (14 pages)