DAVIS Vantage Vue Wireless Console Manual - Manual (Page 8)

Console Location
4
Installing the AC Power Adapter (Optional)
1. Find the power jack located on the left side of the
console case.
2. Insert the power adapter plug into the console power
jack, then plug the other end of the adapter into an
appropriate power outlet.
3. Check to make sure the console runs through a brief
self-test procedure successfully. See “Installing
Batteries” on page 3 for information on the self-test
procedure.
Note: When using an AC power adapter, be sure to use the power adapter supplied with your
Vantage Vue console. Your console may be damaged by connecting the wrong power
adapter. You must use AC power when using WeatherLinkIP.
Console Location
Place the console in a location where the keyboard is easily accessible and the display is easy
to read. For more accurate readings, follow these suggestions.
•
Avoid placing the console in direct sunlight. This may cause erroneous inside temperature
and humidity readings and may damage the unit.
• Avoid placing the console near radiators or heating/air conditioning ducts.
• If you are mounting the console on a wall, choose an interior wall. Avoid exterior walls
that tend to heat up or cool down depending on the weather.
• Avoid positioning a wireless console near large metallic appliances such as refrigerators,
televisions, heaters, or air conditioners.
• The console antenna does not rotate in a complete circle. Avoid forcing the console
antenna when rotating it.
• Be aware of possible interference from cordless phones or other devices. To prevent
interference, maintain a distance of 10 feet (3 meters) between the Vantage Vue console
and a cordless phone (handset and base).
Plugging in the AC adapter