DAVIS Vantage Vue Wireless Console Manual - Manual (Page 23)

Displaying Weather Variables
19
is changed for inside or outside temperature, the unit of measure also changes for all
temperature-related weather variables, such as wind chill, dew point and heat index.
Note: The unit of measure also affects the cooling degree day and heating degree day bases and
the value entered in both screens is automatically converted to the unit of measure selected.
Check the values for both of these bases in the Setup Mode to make sure the value is still
accurate for the new unit of measure. See “Screens 15 and 16: Cooling and Heating Degree
Day Base” on page 13 for more information.
2. Press WxCEN to display weather information available for the outside temperature
variable in the Weather Center.
3. Press WxCEN multiple times to scroll through all the outside-temperature-related Weather
Center screens, which include:
• Maximum Temperature — Displays the highest temperature for the day with the time
the temperature was recorded.
• Minimum Temperature — Displays the lowest temperature for the day with the time
the temperature was recorded.
• Temperature Change Per 24 Hours — Displays the difference between the tempera-
ture currently recorded and the temperature recorded at the same time the day before.
(Updated on the hour.)
• Temperature Change Per Hour — Displays the difference between the temperature
currently recorded and the temperature recorded the hour before. (Updated every 15
minutes.)
• Maximum Outside Temperature Today and Over the Last 25 days — Displays the
highest temperature today and over the last 25 days and the date the temperature was
recorded.
• Minimum Outside Temperature Today and Over the Last 25 days — Displays the
lowest temperature today and over the last 25 days and the date the temperature was
recorded.
• Number of Cooling Degree Days — Displays the number of cooling degree days
logged on the console since it was first powered up or the value was reset. (Displays
only if a threshold has been set.)
• Number of Heating Degree Days — Displays the number of heating degree days
logged on the console since it was first powered up or the value was reset. (Displays
only if a threshold has been set.)
4. Press TEMP again to select the inside temperature.
5. Press WxCEN to display the weather information available for the inside temperatures in
the Weather Center.
6. Continue pressing WxCEN to scroll through all the inside-temperature- related Weather
Center screens, which include:
• Maximum Temperature — Displays the highest inside temperature for the day with
the time the temperature was recorded.
• Minimum Temperature — Displays the lowest inside temperature for the day with the
time the temperature was recorded.