DAVIS Solar Power Kits (6612, 6614) - Manual (Page 9)

8
3. In order for the Vantage Vue console to fit in the shelter, you must move the
battery platform.
Remove the two screws and washers holding the battery platform in place.
4. Move it to the right side (as you face the shelter). Making sure the tray is
flush with the bottom, reinsert and tighten the screws.
5. Plug the console power cable back into the jack. (It fits only one way, with
the latch in back.)
6. The battery comes shipped with the positive cable unconnected to prevent
battery drain. Connect the positive (red) cable to the positive (red) terminal on
the battery.