beautypg.com

DAVIS Solar Power Kits (6612, 6614) User Manual

Page 12

background image

11

3. In order for the Envoy to fit in the shelter, you must move the battery platform.

Remove the two screws and washers holding the battery platform in place.

4. Move it to the right side (as you face the shelter). Making sure the tray is flush

with the bottom, reinsert and tighten the screws.

5. Plug the power cable back into the jack. (It fits only one way, with the latch in

back.)

6. The battery comes shipped with the positive cable unconnected to prevent

battery drain. Connect the positive (red) cable to the positive (red) terminal on
the battery.