DAVIS Solar Power Kits (6612, 6614) - Manual (Page 17)

16
10. Plug the main power cable into the Envoy.
11. If you are mounting a cabled Weather Envoy, remove the rubber plug from the
hole on the floor of the shelter, under the Envoy. Wrap the oval-hole split
grommet around the Envoy’s ISS cable and feed the cable up through the
hole, inserting grommet snuggly into the hole. Plug the ISS cable into the
Envoy.
12. Use your PC to set up the Envoy as shown in your Weather Envoy or Envoy8X
manual.
13. Close and lock the shelter.
Envoy8X