DAVIS Solar Power Kits (6612, 6614) - Manual (Page 6)

5
3. In order for the Vantage Pro2 console to fit in the shelter, you must move the
battery platform.
Remove the two screws and washers holding the battery platform in place.
4. Move it to the left side (as you face the shelter). Making sure the tray is flush
with the bottom, reinsert and tighten the screws.
5. Plug the console power cable back into the jack. (It fits only one way, with the
latch in back.)
6. The battery comes shipped with the positive cable unconnected to prevent
battery drain. Connect the positive (red) cable to the positive (red) terminal on
the battery.