DAVIS Solar Power Kits (6612, 6614) - Manual (Page 16)

15
5. Plug the console power cable back into the jack. (It fits only one way, with the
latch in back.)
6. The battery comes shipped with the positive cable unconnected to prevent
battery drain. Connect the positive (red) cable to the positive (red) terminal on
the battery.
7. On the back wall of the shelter, look for the embossed outline of an Envoy and
the screw holes marked “E”
8. Insert the two ½'' #6 screws into the marked holes. The depth of the hole has
been specifically designed so that the screw will “bottom out” at the correct
depth. Do not overtighten.
Note: You may need to adjust the screw height for proper fit.
9. If you are mounting an Envoy8X or a wireless Weather Envoy, point the
Envoy’s antenna downward. If using a Weather Envoy, insert the data logger
into the Envoy. Guide the two keyholes on the back of the Envoy over the two
screws and pull the console downward to lock in place
E
E
VV VV
VP2 VP2
ENVOY Vantage VUE Vantage PRO2