DAVIS Cellular Telephone Antenna Kit - Manual (Page 9)

Configuring The Cellular Telephone Modem Page 9
Power the CTM
Connect power to the CTM, as shown below.
1. On one side of the terminal block, connect the black CTM power wire to terminal 1
(grey), the green CTM power wire to terminal 3 (orange), and the red CTM power wire
to terminal 4 (orange).
2. On the other side of the terminal block, connect the black power adapter wire to ter-
minal 1 (grey) and the red power adapter wire to terminal 4 (orange).
3. Plug the power adapter into a power outlet.
Run The Modem Configuration Program
Finally, use the supplied modem configuration program to configure the CTM.
1. Place the Modem Configuration Disk in your disk drive.
2. Choose Run from the File Menu (Windows 3.1) or the Start Menu (Windows 95).
AC-Power
Adapter Wires
+
_
Terminal
Block
1 2 3 4
Red Black
Green
Modem
(CTM)
CTM Power
Cable
(PC RADIO Adapter
Not Shown)