DAVIS Cellular Telephone Antenna Kit - Manual (Page 10)

Page 10 Cellular Telephone Antenna Kit
3. Type A:\CONFIG and press Enter (or choose Ok).
The Wireless Configuration Program dialog box appears.
4. Select Cell Phone Modem from the Modem Type drop-down list.
5. Select the COM port to which the CTM is connected from the COM Port drop-down list.
If you don‘t know the COM port number, choose COM 1. If you get a pro-
gram error when attempting to configure the CTM, try again using COM 2,
and so on, until you find the correct COM port setting.
6. If you fully understand the CTM’s AT command set and wish to configure the CTM dif-
ferently than the default configuration, choose Advanced. You may then enter the
desired AT commands and choose Execute Command to execute the string. Choose
View Conf to view the CTM’s current configuration.
The default configuration should work in almost all installations; we do not
recommend using the Advanced setting option.
7. When finished, choose Configure.
The program will attempt to locate and configure your CTM. If you encoun-
ter an error, make sure you have selected Cell Phone Modem and then try
different serial ports until the configuration completes successfully.