AMT Datasouth 600 - Manual (Page 36)

34 User Manual
Notes:
§ If you have set the printer as the default printer, the driver is now ready for use.
§ If you did not set the printer as the default printer, you can change the setting by right
clicking on the printers' icon and select 'Set as Default' from the dialog.
§ If you are updating an existing driver, it is suggested that you delete the old driver
first.
§ A Windows driver must be installed prior to installing Xbar.
§ Be sure to select they appropriate width model (2 inch, 3 inch, 4 inch or 6 inch
model). If you select a smaller width model than the printer all your applications will
be truncated at that width. Example: If the printer being used has a width of 6 inches
and the driver selected is for a 4 inch model, then only 4 inches of information will
be printed on the label.
§ A label printed using a Windows driver is printed using GDI graphics. The installed
emulation (PPLA, PPLB or PPLZ) is not used when printing using the Windows
driver. The Application or the Driver controls all printing.