AMT Datasouth 600 - Manual (Page 29)

User Manual 27
Loading Media into the Cutter Option
1. Install media as indicated in the Loading Media Section. Return to these steps when
directed to do so.
2. Push the Media Stock through the slot on the Cutter Module near the platen Roller.
Figure 30 – Inserting Labels in the Cutter Option
10. Close and lock the print head module by pressing firmly until the right and left Print
Head Latches snap shut.
11. Close the Media Access Cover.
12. Press the Feed Button to cut the first label.
Figure 31 – Cutting Labels