AMT Datasouth 600 - Manual (Page 20)

18 User Manual
Loading Media
1. Open the Top Media Access Cover by pressing in on both Cover locks (one on each side of
the printer) and lifting the top cover until it rests in the vertical position.
Figure 14 – Top Media Cover Latches
2. Remove the Media Hanger from the printer.
3. Remove one side of the Guides from the Media Hanger and slide the Media Roll onto the
Media Hanger, then reinstall the removed Guide.
4. Place the Media Hanger with roll of media into the appropriate slots on the printer and
centered the media in the printer.
Figure 15 – Media Roll Installation
Cover Lock