JKS OGS166 User Manual
Installation instructions, Welcome, Important

JKSOGS166
JKS Front Trackbar + Sector Shaft Reinforcement Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Front Trackbar + Sector Shaft Reinforcement Kit
Part Number: JKSOGS166
Applications: Wrangler JK, 2007+
Welcome
CONGRATULATIONS on purchasing the Front
Trackbar + Steering Sector Shaft Reinforcement Kit
from JKS Manufacturing. We are committed to pro-
viding you with the best products available and your
satisfaction is our first priority.
Important
INSTALLATION REQUIRES WELDING by a quali-
fied welder or metal fabricator. A bolt-on installa-
tion is not possible for this product.
INSTALLATION REQUIRES OE type steering box.
NOT COMPATIBLE WITH TeraFlex track bars.
NOT COMPATIBLE WITH frame-mounted track bar
drop brackets.
Tools Required
Hydraulic Floor Jack & Jack Stands
Metric/Standard Socket Wrench Set
Torque Wrench
15/16” Open End Wrench
Black Marker or Metal Scribe
Flat Black Spray Paint
Anti-Seize Lubricant
Compact Die Grinder with Sanding Wheel (or
equivalent tool for removing paint from chassis)
Welding Equipment
Assortment of Small Pry Bars *
Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036