JKS BSE251 - Manual

JKSBSE251 JKS Hydraulic Bump Shocks Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Hydraulic Bump Shocks
Part Number: JKSBSE251
Applications: Wrangler JK, 2007+ (rear only)
Welcome
CONGRATULATIONS on purchasing a set of new Hydrau-
lic BumpShocks from JKS Manufacturing! We are commit-
ted to providing you with the best products available and
your satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
INSTALLATION of this product is not reversible and
should only be performed by an experienced mechan-
ic or fabricator.
CHASSIS MODIFICATIONS are required to install this
product. Do not attempt installation if you are inexpe-
rienced or uncomfortable with cutting and welding on
your vehicle’s frame.
THESE INSTRUCTIONS provide an overview of the in-
stallation process only, and are in no way a substitute
for the experience one needs to do the job properly.
DO NOT EXCEED maximum range of bump shock ad-
justment – see illustration on page 4.
Tools Required
 Hydraulic Floor Jack and Jack Stands
 Metric/Standard Socket Wrench Set
 Spanner or Strap Wrench *
(or similar tool for tightening Bump Shock Nut)
 Metal Cutting Tool (for cutting through frame)
 Grinding/Sanding Tool
(for light material removal and smoothing)
 Emory Cloth
(or similar abrasive for paint/plating removal)
 Tape Measure
 Felt Tip Marker (or similar marking tool)
 Clamping Tool *
(for holding product in place during welding)
 Welding Equipment
 Drill with 1/8” and 3/8” Bits
 Coil Spring Compressor *
 Spray Lubricant (WD-40 or equivalent)
 Anti-Seize Lubricant
 Satin Black Spray Paint
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036