JKS PN2291 User Manual
Installation instructions

JKS HD Extended Brake Line Installation
PN 2291
Page 1 of 2
Installation
Instructions
Product: HD Extended Brake Lines
Part Number: PN 2291
Applications: Jeep Wrangler YJ, 1987-95
Jeep CJ5 / CJ7 / CJ8, 1982-86
Welcome
CONGRATULATIONS on purchasing new
HD Extended Brake Lines from JKS
Manufacturing. We are committed to providing
you with the best products available and your
satisfaction is our first priority.
PLEASE READ these Installation Instructions
carefully, and save them for future reference,
as they contain important installation and
maintenance information.
Important
RECOMMENDED FOR vehicles lifted 4-6”
only. Installation on vehicles with a lower ride
height is possible, as long as installer properly
secures the brake line to prevent interference
with other components.
COMPATIBLE WITH 3/8” brake hose bolt at
caliper only – will not fit 7/16” bolt.
Tools Required
Metric/Standard Socket Wrench Set
3/8” Wrench (Flare Nut or Open End) **
1/2” Wrench (Flare Nut or Open End) **
9/16” Open End Wrench
11/16” Open End Wrench
T35 Torx Driver *
Torque Wrench
Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some
applications. Thoroughly read instructions first to
determine which tools will be required for your
application.
** The original mounting bolt for the factory brake hose
mounting bracket can vary by application.
Parts
DESCRIPTION
QTY
A HD Extended Brake Line
2
B Copper Washer
4
C Mounting Bracket
2
D Retainer Clip
2
E Self Tapping Screw
2