JKS OGS924 - Manual

JKSOGS924 JKS Steering Stabilizer Tie Rod Mount Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Steering Stabilizer Tie Rod Mount
Part Number: JKSOGS924
Applications: Wrangler JK, 2007+
Welcome
CONGRATULATIONS on purchasing a new Steering
Stabilizer Tie Rod Mount from JKS Manufacturing. We are
committed to providing you with the best products available
and your satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
NOT COMPATIBLE WITH the OE steering stabilizer.
Make sure you have an aftermarket steering stabilizer
with 5/8” ID bushing before attempting installation.
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 Tape Measure *
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description Part# QTY
A Tie Rod Bracket Assembly 030104 1
B U-Bolt Strap 761120214R 2
C 7/16” Split Lock Washer 33624 4
D 7/16” GR5 Nut 36358 4
E 7/16” Fender Washer 33010 1
F 7/16” Ovalok Nut 37306 1
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036