JKS OGS161 User Manual
Installation instructions, Welcome, Important

JKSOGS161
JKS Front Trackbar Brace Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Front Trackbar Brace
Part Number: JKSOGS161
Applications: Jeep Wrangler JK, 2007+ (front)
Welcome
CONGRATULATIONS on purchasing a new Front Trackbar
Brace from JKS Manufacturing. We are committed to
providing you with the best products available and your
satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
INSTALLATION REQUIRES WELDING by a qualified
welder or metal fabricator.
JKS ADJUSTABLE TRACKBAR IS REQUIRED if exist-
ing track bar interferes with steering damper.
Tools Required
Hydraulic Floor Jack & Jack Stands
Metric/Standard Socket Wrench Set
Black Felt Tip Marker (or equivalent)
Torque Wrench
Die Grinder with Sanding Wheel
(or equivalent tool for removing paint)
Welding Equipment
Weldable Corrosion Resistant Coating,
3M® PN 05917 (or equivalent)
Satin Black Spray Paint
Anti-Seize Lubricant *
Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description
Part#
QTY
A
Front Trackbar Brace
03030
1
B
Steel Sleeve
123
1
C
M14 x 80mm Bolt
11113290
2
D
9/16 SAE Washer
W96S
3
E
M14 Nylock Nut
11129042
1
F
Stabilizer Stud
103031
1
G
7/16” Fender Washer
33010
1
H
7/16” Locking Nut
37306
1
I
5/8” Poly Bushing
2611
1
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036