JKS OGS999 User Manual
Installation instructions, Welcome, Important

JKSOGS999
JKS Adjustable Cross-Over Shock Mount Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable Cross-Over Shock Mount
Part Number: JKSOGS999
Applications: Cherokee XJ, 1984-01
Welcome
CONGRATULATIONS on purchasing a new Adjustable
Cross-Over Shock Mount from JKS Manufacturing. We are
committed to providing you with the best products available
and your satisfaction is our first priority.
PLEASE READ these instructions carefully, as they con-
tain important installation information.
Important
EXHAUST MODIFICATIONS ARE REQUIRED in order
to install this product.
NEW SHOCK ABSORBERS ARE REQUIRED unless
optional Rear Axle Shock Mounts PN OGS922 are
installed at the same time.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036
Tools Required
Metric/Standard Socket Wrench Set
Torque Wrench
Hammer & Punch *
Die Grinder with Sanding/Grinding Wheel
(or similar tool for cleaning chassis and axle) *
Anti-Seize Lubricant
Cutting Wheel or Cutting Torch
(for removing OE rear shock mounts from axle) *
Welding Equipment *
Satin Black Spray Paint *
Wheel Bearing Grease
Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.