JKS BSE201 User Manual
Installation instructions, Welcome, Important

JKSBSE201
JKS Hydraulic Bump Shocks Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Hydraulic Bump Shocks
Part Number: JKSBSE201
Applications: Wrangler JK, 2007+ (front only)
Welcome
CONGRATULATIONS on purchasing a set of new Hydrau-
lic BumpShocks from JKS Manufacturing! We are commit-
ted to providing you with the best products available and
your satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
DO NOT EXCEED maximum range of bump shock ad-
justment – see illustration on page 3.
INSTALLATION of this product is not reversible and
should only be performed by an experienced mechan-
ic or fabricator.
Tools Required
Hydraulic Floor Jack and Jack Stands
Metric/Standard Socket Wrench Set
Spanner or Strap Wrench *
(or similar tool for tightening Bump Shock Nut)
Die Grinder with Cut-Off Wheel (or reciprocating saw)
File or Deburring Tool
Emory Cloth (or similar paint stripping tool)
Tape Measure
Felt Tip Marker (or similar marking tool)
Small Clamping Tool *
Welding Equipment
Drill with 3/8” Bit
Coil Spring Compressor *
Spray Lubricant (WD-40 or equivalent)
Anti-Seize Lubricant
Satin Black Spray Paint
Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description
QTY
QTY
A
Bump Shock Assembly
RFC/BS02
2
B
Bump Shock Nut
RFC/SN50
2
C
Jounce Adapter
03154
2
877-533-7557 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036