JKS 2210 - Manual

JKS2210 JKS Adjustable Coil Spacer Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable Coil Spacers (ACOS™)
Part Number: JKS2210
Welcome
CONGRATULATIONS on your purchase of a new JKS
ACOS™ system! At JKS Manufacturing, we are committed
to providing you with the best products available and your
satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Tools Required
 Hydraulic Floor Jack and Jack Stands
 Metric/Standard Socket Wrench Set
(including a 17mm socket)
 6” Socket Extension
 8mm and 1/4” Allen Wrenches
 Die Grinder with Cut-Off Wheel
(or reciprocating saw)
 Grinding Wheel (or similar tool)
 File or Deburring Tool
 Emory Cloth (or similar paint stripping tool)
 1/4” Drill Bit
 Rubber or Plastic Mallet *
 Tape Measure
 Spray Lubricant (WD-40 or similar)
 Anti-Seize Lubricant
 Medium Strength Threadlocker
 Coil Spring Compressor *
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Important
MOST VEHICLES REQUIRE additional parts or modi-
fications to accommodate the immediate increase in
ride height provided by the ACOS system.
DO NOT EXCEED maximum range of adjustment – see
illustration on page 3.
NOT COMPATIBLE with Rancho, TrailMaster, Rough
Country or Fabtech coil springs.
Parts
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036