JKS 9904 User Manual
Installation instructions, Welcome, Tools required

JKS part number
JKS DESCRIPTION Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: B1 Body Lift™
Part Number: JKS9904
Applications: Wrangler TJ, 1997+
Welcome
Congratulations on purchasing a new B1 Body Lift
from JKS® Manufacturing. We are committed to pro-
viding you with the best products available and your
satisfaction is our first priority.
We hope you enjoy your JKS® purchase and are here
to help if you still have questions after reviewing this
safety information and instructions. Contact us online
at www.jksmfg.com or by phone at 877-533-7557.
Tools Required
Metric/Standard Socket Wrench Set
Torque Wrench
Tape Measure
Medium Strength Threadlocker
Spray Lubricant (WD-40 or similar)
Hydraulic Floor Jack
Sturdy Block of Wood (to protect body)
Center Punch and Hammer
1/4” Drill Bit
Reciprocating Saw or Die Grinder with Cut-Off Wheel
(for trimming fan shroud)
Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description
QTY
A
Dura-Thane Body Puck
11
B
1/2” x 4-1/2” Bolt
6
C
1/2” Flat Washer
6
D
7/16” x 4” Bolt
5
E
7/16” Flat Washer
5
F
1/4” x 3/4” Bolt
2
G
1/4” x 1” Fender Washer
1
H
1/4” Nylock Nut
6
I
Pivot Bushing Drop Plate
1
J
Extended Radiator Bumper
2
877-533-7557 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036