JKS OGS168 - Manual

JKSOGS168 JKS OE Replacement Rear Tackbar Bracket Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: OE Replacement Rear Trackbar Bracket
Part Number: JKSOGS168
Applications: Jeep Wrangler JK, 2007+ (rear)
Welcome
CONGRATULATIONS on purchasing a new OE Replace-
ment Rear Trackbar Bracket from JKS Manufacturing.
We are committed to providing you with the best products
available and your satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
INSTALLATION REQUIRES WELDING by a qualified
welder or metal fabricator.
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 Tape Measure
 Die Grinder with Cut-Off Wheel
(for removing factory brackets)
 Grinding Wheel
 6” Clamp or larger (or similar tool to hold bracket in
place during welding)
 Welding Equipment
 Satin Black Spray Paint
 Angle Measuring Tool
 Anti-Seize Lubricant *
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Recommended Upgrade
For maximum strength and to prevent future damage
from occurring, we strongly recommend the
installation of our optional Rear Trackbar
Brace JKSOGS169.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036