HP SN6000 Fibre Channel Switch - Manual (Page 84)

84 Managing switches
Table 17 describes the fields of the Call Home Setup dialog box.
Table 17 Call Home Setup fields
Field Description
Primary SMTP: (active)
(active)
indicates that the Primary SMTP (Simple Mail
Transfer Protocol) is the SMTP server that Call Home will try
to use when transmitting email messages. Call Home
operates as an SMTP sending agent.
After any system configuration, the Primary SMTP server will
always becomes the active SMTP, provided it is enabled
and has a non-default address defined (0.0.0.0 is the
default).
Primary SMTP Server
Address:
The IP address of the primary (first) SMTP server.
Primary SMTP Server Port: The service port number that the primary SMTP server is
listening on to accept connections from SMTP sending
agents.
Secondary SMTP: The second SMTP server. If the primary SMTP is not
enabled/defined, or if there is a failure in communicating
with the primary SMTP server, the Secondary SMTP server
will become the (active) SMTP server—the one used by Call
Home for the next attempt to transmit email.
Secondary SMTP Server
Address:
The IP address of the secondary SMTP server.
Secondary SMTP Server
Port:
The service port number that the secondary SMTP server is
listening on to accept connection from SMTP sending
agents.
Contact Email Address: The email address of the point-of-contact for the switch. This
email address is included in the text of email messages
using the FullText format under the section for Contact
Information.
Phone Number: The phone number of the point-of-contact for the switch. This
value is included in the text of email messages using the
FullText format under the section for Contact Information.
Street Address: The address of the point-of-contact for the switch. This value
is included in the text of email messages using the FullText
format under the section for Contact Information.