HP PSC 2210xi All-in-One Printer - Manual (Page 51)

set the date and time 45
hp psc 2200 series
set the date and time
You can set the date and time from the front panel. When a fax is
transmitted, the current date and time are printed along with the fax header.
The date and time format is based upon the language and country setting.
Normally the computer software sets the date and time automatically.
1 Press Setup.
2 Press 3, then press 1.
This selects Basic Fax Setup, then selects Date and Time.
3 Enter the month, day, and year (last two digits only) by pressing the
appropriate number on the keypad.
The underline cursor presented initially beneath the first digit advances
automatically to each digit after, each time you press a button. The
time prompt automatically appears after you enter the last digit of the
date.
4 Enter the hours and minutes.
The AM/PM prompt automatically appears after the last digit of the
time is entered.
5 Press 1 for AM or 2 for PM.
The new time and date settings appear on the front panel.
set the fax header
We recommend that you use the Fax Setup Wizard during installation to
set up the Fax Header. Follow these steps to enter your name and fax
number.
1 Press Setup.
2 Press 3, then press 2.
This selects Basic Fax Setup, then selects Fax Header.
3 After Your Name appears, enter your name using the numeric
keypad, as described in the next section, enter text, then press Enter.
4 Using the keypad, enter your fax number.
5 After you finish entering your fax number, press Enter.
In Hungary, the subscriber identification code (fax
header) can be set or changed only by authorized
personnel. For more information, contact your
authorized HP dealer.