HP PSC 2210xi All-in-One Printer - Manual (Page 16)

load originals and load paper 10
hp psc 2200 series
load envelopes
Use the print feature of your software to print to envelopes with your
HP PSC. Your HP PSC provides two methods for working with envelopes.
Do not use shiny or embossed envelopes, or envelopes that have clasps or
windows.
• If you are printing one envelope, slide the envelope into the envelope
slot, which is located on the right side toward the back of the output
tray. Insert the envelope with the flap up and on the left, as shown in
the illustration. Slide the envelope until it stops.
• If you are printing multiple envelopes, remove all paper from the
paper tray, and then slide a stack of envelopes into the tray, with the
envelope flaps up and to the left (print-side down), until they stop.
Adjust the paper-width guide against the envelopes (be careful not to
bend the envelopes). Make sure the envelopes fit within the tray (do
not overload it).
Consult the help files in your word processing software for details on
how to format text for printing on envelopes.
load 4 x 6 inch photo paper
Following is the procedure for loading 4-by-6 inch photo paper into your
HP PSC.
1 Remove all paper from the paper tray, and then slide a stack of photo
paper into the tray until it stops.
Make sure the print side (glossy) faces down.
If the photo paper you are using has perforated tabs, load the photo
paper so that the tabs are closest to you.