HP PSC 2210xi All-in-One Printer User Manual

Page 18

load originals and load paper

hp psc 2200 series

tips for loading other types of paper in the paper tray

The following table provides guidelines for loading certain types of paper
and transparency film. For best results, adjust the paper settings each time
you change paper types and paper sizes. For more information, see set the
paper type on page 13.

paper

tips

HP papers

• HP Premium Inkjet Paper: Locate the gray arrow on the nonprinting

side of the paper, and then insert paper with the arrow side facing up.

• HP Premium or Premium Plus Photo Paper: Load the glossy (print) side

down. Always load at least five sheets of regular paper in the paper
tray first, and then place the photo paper on top of the regular paper.

• HP Premium Inkjet Transparency Film: Insert the film so that the white

transparency strip (with arrows and the HP logo) is on top and is
going into the tray first.

• HP Inkjet T-shirt Transfer Iron-On: Flatten the transfer sheet completely

before using it; do not load curled sheets. (To prevent curling, keep
transfer sheets sealed in the original package until you are ready to
use them.) Manually feed one sheet at a time, with the unprinted side
facing down (the blue stripe faces up).

• HP Matte Greeting Cards, HP Glossy Greeting Cards, or HP Felt-

Textured Greeting Cards: Insert a small stack of HP greeting-card
paper, with the print-side down, into the paper tray until it stops.

Labels
(works only with
printing)

• Always use letter-size or A4-size label sheets designed for use with

HP inkjet products (like Avery Inkjet Labels), and make sure that the
labels are not over two years old.

• Fan the stack of labels to make sure none of the pages are sticking

together.

• Place a stack of label sheets on top of standard paper in the paper

tray, print-side down. Do not insert labels one sheet at a time.

Postcards or hagaki
cards (only works
with printing)

Insert a stack of postcards or hagaki cards with the print-side down into
the paper tray until it stops. Line the postcards up on the right side of the
paper tray, slide the width guide up against the left side of the cards, and
then slide the paper-length guide in until it stops.