HP XP P9500 Storage - Manual (Page 63)

2. Do the following:
•
Change the variables to values appropriate for your storage system deployment.
•
Use the spreadsheet format to edit the configuration settings.
For more information about CFL-based spreadsheet formats, see “Function tags in
spreadsheets in Volume Retention” (page 64) .
•
Change the function tags and access attributes.
Note: You can omit the [Serial Number] and [LDKC] function tag parameters, but
the [Attribute] function tag parameter is required.
For [Serial Number], specify the serial number of the storage system.
For [LDKC], specify the LDKC (00) which you want to set access attributes.
Note: If you do not specify an LDKC, the default value (00) is used.
For [Attribute], specify the CU, LDEV, and Attribute (access). LDEV range: 1 to
65,280. Write CU and LDEV in one or two hexadecimal digits. Specify the following for
Attribute: Read/Write, Read Only, Protect.
For more information about access attributes, see “CFL-based spreadsheet format in
Volume Retention” (page 63) .
For more information about the spreadsheet format and the variables you can use, see
“CFL-based spreadsheet format in Volume Retention” (page 63) .
3. Save your changes.
CFL-based spreadsheet format in Volume Retention
The following example shows the spreadsheet format:
#!Version Version number,program product,;
Function tag
Definitions
For more information about the function tags, see “Function tags in spreadsheets in Volume
Retention” (page 64) . For more information about the definitions, see “Definitions used in
spreadsheet formats in Volume Retention” (page 64) .
The following table describes the variables used in the spreadsheet format.
Description Variables
First row—declaration line
Declaration line. Do not alter this row. #!
Indicates that the RMI version number follows. Cannot be changed. Followed by a space. Version
RMI version followed by a comma with no space. Version number
“VR” for Volume Retention followed by a comma with no space. Program product
Second row
[Serial Number], [LDKC], [Attribute] Function tag
Indicates the function tags in the above order, enclosed in brackets.
Row following function tag
System configuration data. Definitions
Workflow for CFL-based spreadsheets in Volume Retention 63