HP XP P9500 Storage - Manual (Page 54)

Content Parameter Column
CU number of the secondary data volume CU(s) F
LDEV number of the secondary data volume LDEV(s) G
Mirror ID Mirror ID H
The number of the master journal M-JNL I
The number of the remote journal R-JNL J
Serial number of the secondary storage system DKCSN K
Controller ID of the secondary storage system ControllerID L
Path group ID PathGroup M
Copy mode specified when you add the pair * CopyMode N
Priority specified when you add or resynchronize the pair Priority O
Error level specified when you added or resynchronized the pair, or
changed the option of that pair ErrorLevel P
CFW specified when you added or resynchronized the pair, or
changed the option of the pair. CFW is the setting that specifies whether CFW Q
the Cache-fast-write data is copied to the secondary data volume or
not.
*If you add a pair using the AddPair operation tag and you specify None for the Copy Mode parameter, the Pair
operation tag outputs Entire for this item. If you perform the delta resync operation after adding a pair, the output copy
mode may be different from the copy mode specified when you added the pair.
•
One line lists the information for one pair.
•
The P9500 storage system allows only 65,280 Cnt Ac-J Z pairs.
•
The information returned by Get Pair is output to a file named
RemoteCopyJournalMF_Pair_00.spd
.
•
Save the pair information. You can copy some retrieved parameter data and use them when
writing SuspendPair, ResumePair, and DeletePair operation tags. You can use this
information to add the pair again.
Adding Continuous Access Journal Z pairs
Use the RemoteCopyJournalMF_AddPair_def_.spd spreadsheet template to add Cnt Ac-J
Z pairs. Add pairs on the primary storage system.
NOTE: Do not use P-VOLs and S-VOLs volume pairs with other Cnt Ac-J Z pairs.
Range/Character
Numbers Content Parameter Column
00 LDKC number of the primary data volume LDKC A
00 to FE CU number of the primary data volume CU B
00 to FF LDEV number of the primary data volume LDEV C
00 to FF LDKC number of the secondary data volume LDKC D
00 to FE CU number of the secondary data volume CU(S) E
00 to FF LDEV number of the secondary data volume LDEV(S) F
00 to 03 Mirror ID Mirror ID G
54 Continuous Access Journal Z operations