HP Integrity Superdome 2 Server - Manual (Page 192)

31 Event notifications
Enclosure event notifications
Enclosure events produce screen messages with the SHOW DISPLAY EVENTS option enabled. If
you are directly affected by an event, then a message displays whether the SHOW DISPLAY
EVENTS
option is enabled or disabled.
Event messages include the device affected, the device name, and the date and time of the event.
Some examples of event messages are:
•
The enclosure is in a degraded state.
•
Blade X has experienced a failure.
•
The temperature on blade X has exceeded the failed threshold.
•
Fan X has experienced a failure.
•
The power supplies are no longer redundant.
•
Power supply X is in a degraded state.
•
The enclosure temperature has exceeded the degraded threshold.
Command line event notifications
When the SET DISPLAY EVENTS option is turned ON, the terminal interface displays error,
warning, and status messages, depending on the behavior of the enclosure and its components.
The syntax for these messages are:
•
: Description of error
•
: Description of warning
•
: Description of status
Causes of the error, warning, or status events that display are listed in the following table.
Cause Event
A bay was assigned or unassigned from a group. Bay Event
A blade was inserted into the enclosure. Blade Inserted
The thermal status of a blade changed Blade Thermal Status Changed
A blade was removed from the enclosure. Blade Removed
The port mapping information of a blade was updated. Blade Port Map Info
A DVD module was inserted in the monarch enclosure. DVD Inserted
A DVD module was removed from the monarch enclosure. DVD Removed
A change in status has occurred because of a change in the state of one or more
hardware components or server readings. Enclosure Status Change
The name of an enclosure was changed. Enclosure Name Change
The status of a fan has changed. Fan Status Change
A fan has been inserted. Fan Inserted
A fan has been removed. Fan Removed
A GPSM has been inserted. GPSM Inserted
A GPSM has been removed. GPSM Removed
192 Event notifications