HP Integrity Superdome 2 Server - Manual (Page 114)

SHOW INTERCONNECT PORT MAP
•
Command:
SHOW INTERCONNECT PORT MAP {ALL | <bay number>
| <bay number>-<bay number>}
•
Description:
Displays the port mapping for the interconnect specified by the bay number
•
Access level/Bay level:
All ◦
◦ Bay specific
•
Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
•
Example:
OA-0018FE27577F> SHOW INTERCONNECT PORT MAP ALL
1: Cisco Catalyst Blade Switch 3120X for HP w/ IP Base
Type: Ethernet
Width: Single
Status: OK
Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Status OK OK OK OK
Blade 2A 7 2B 7
Mezz/Nic NI NI NI NI
Port 1 1 1 2
2.
3.
4.
SHOW INTERCONNECT POWERDELAY
•
Command:
SHOW INTERCONNECT POWERDELAY {ALL | <bay number> [{ - | , }
<bay number>]}
•
Description:
Displays the PowerDelay status for the specified interconnects or range of interconnects
•
Access level/Bay level:
All ◦
◦ Bay specific
•
Restrictions:
None
•
Example:
OA-0018FE27577F> SHOW INTERCONNECT POWERDELAY ALL
Current PowerDelay Status: Not in Progress
Bay Device PowerDelay State Delay (seconds)
--- -------------------------------- ------------
114 Interconnect management commands