Vparmodify – HP Integrity Superdome 2 Server User Manual
Page 147
Meaning
Option
specified, a vPar name in the format
is automatically assigned to the created virtual partition.
NOTE:
The name for the vPar should be specified
either using –p
vPar name using both options in the same command
line will be considered invalid.
Specifies the nPar to which the vPar belongs to in ASCII
format either as a name or number. This option is
-N nparidentstr
mandatory for a command invoked from OA which that
not specify –z. For commands invoked from the
partition, behavior is to create the vPar in that nPar, if
–n
is not specified. –z and –n are mutually exclusive.
The default parspec is modified with the –n option.
•
Access level/Bay level:
OA Administrator, OA Operator
•
Restriction:
You must be connected to the monarch OA.
VPARMODIFY
•
Command:
vparmodify { -p vpar_id -N npar_id | -p npar_id:vpar_id }
[-a rsrc]...
[-d rsrc]...
[-m rsrc]...
[-P new_vpname]
•
Description:
Modifies the resources of the specified virtual partition. The command can also rename the
virtual partition.
The options for the command:
Meaning
Option
Specifies the target virtual partition. The vparidentstr
can be specified in ASCII format as a vPar number or
-p vparidentstr
a vPar name, or in the format
nparidentstr:vparidentstr
. When specified in
the format nparidentstr:vparidentstr,
nparidentstr
and vparidentstr can either be a
name or number.
NOTE:
When executed from the OA, the vPar should
be identified using the format
nparidentstr:vparidentstr
or used along with
the –N option.
Specifies resources to be added to the virtual partition.
-a rsrc
Specifies resources to be modified in the virtual partition.
-m rsrc
Specifies resources to be deleted from the virtual
partition.
-d rsrc
Specifies a new name for the virtual partition.
-P new_vp_name
VPARMODIFY
147