HP Integrity Superdome 2 Server - Manual (Page 14)

the Onboard Administrator. You can only change the password for the Administrator account. The
following table indicates the capabilities of the user based on their privileges and permitted bays.
Bays selected for
this account Account name/privilege
level Capabilities Account classification
All Administrator/administrator Administrator •
All commands
•
Local account, not LDAP
• Only account remaining after a reset
Onboard Administrator to factory
defaults (account retains configured
Administrator password)
•
Administrator account password can
be reset to factory default through the
Onboard Administrator serial port
using the L lost password recovery
option
•
Can download, add, and clear Secure
Shell key. This key works only with the
Administrator account.
OA bays (all bays
automatically
selected) user name/administrator OA Administrator • All commands
•
Enables access to all aspects of the HP
Integrity Superdome 2 complex and
Onboard Administrator including
configuration, firmware updates, user
management, and resetting default
settings.
No OA bays and
only selected device user name/administrator •
Can perform all operations to
permitted device bays and interconnect
bays including virtual power and
console access.
administrator
bays and
interconnect bays
OA bays and can
have other bays user name/operator OA Operator •
Set rack name
• EBIPA enable/disable permitted bays
selected, but the
capabilities for the
•
Change OA network settings
other bays are
defined in operator
• Perform enclosure management
commands
Selected device
bays and
interconnect bays user name/operator •
Can perform all operations to
permitted device bays and interconnect
bays including virtual power and
console access.
operator
Selected OA bays
and some device user name/user OA user • Can view status and information of
selected OA, device and interconnect
bays
bays and
interconnect bays
•
Can view CLI history
•
Can set password for own account
• Can set user contact information for
own account
•
Can 'show' CLI commands
No OA bays and
some device bays user name/user user •
Can view status and information of
selected bays
and interconnect
bays
• Can view CLI history
•
Can set password for own account
•
Can set user contact information for
14 Command line