HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class User Manual
Page 62
62
User Login
User Name
Account name
Login Level
Authority level
Super User
Super user privileges enabled/disabled
UserAuthentication Enabled
Enforcement of account names and authority (always True)
Firmware
Firmware Version
Active firmware version
Inactive Firmware Version
Not applicable.
Pending Firmware Version
Firmware version that will be activated at the next reset
PROM/Flasher Version
PROM firmware version
Services
NTP Client Enabled
NTP client status. Controls time synchronization with an NTP server.
NTP Server Address
The IP address of the centralized NTP server. Ethernet connection to
NTP server is required.
FDMI Enable
Fabric Device Management Interface status. If enabled, device
information can be obtained, managed, and saved through the
fabric using Name Service Management Server functions. McDATA
Web Server will report all FDMI information reported by the entry
switch, if FDMI is enabled on the entry switch. See ”
” on page 35 for information about
displaying FDMI information.
FDMI HBA Entry Limit
Maximum number of Host Bus Adapters (HBA) that can be registered
with a switch.
Embedded GUI Enabled
McDATA Web Server web applet status. Enables or disables the web
applet on the switch.
Inactivity Timeout
Number of minutes the switch waits to terminating an idle command
line interface session. Zero (0) disables the time out threshold.
GUI Mgmt Enabled
Web applet status.
Telnet Enabled
Telnet client status
SSH Enabled
Secure Shell status. If enabled, an encrypted data path is provided
for command line interface sessions.
SSL Enabled
Secure Sockets Layer status. If enabled, encryption for switch
management web applet and CIM sessions is provided.
CIM Enabled
Common Information Model status. The CIM agent is based on the
SNIA Storage Management Initiative Specification (SMI-S), which is
the standard for SAN management in a heterogeneous environment.
FTP Enabled
FTP status
Management Server Enabled
Management server status.
Table 8
Switch data window entries (Continued)
Entry
Description