HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 44)

44
Displaying the configured and active zone sets
You can display the contents of the configured zone set and active zone set with the Configured Zoneset
data window and the Active Zoneset data window. The Configured Zonesets and Active Zoneset data
windows use display conventions for expanding and contracting entries that are similar to the fabric tree.
An entry handle located to the left of an entry in the tree indicates that the entry can be expanded. Click
this handle or double-click the following entries:
• A zone set entry expands to show its member zones.
•
A zone entry expands to show its member ports/devices.
The Configured Zonesets data window, shown in Figure 16 , displays all zone sets, zones, and zone
membership in the zoning database. To open the Configured Zoneset data window, click the Configured
Zoneset tab below the data window.
Figure 16
Configured zonesets data window
The Active Zoneset data window, shown in Figure 17 , displays the zone membership for the active zone
set that resides on the fabric management switch. The active zone set is the same on all switches in the
fabric. To open the Active Zoneset data window, click the
Active Zoneset tab below the data window.
Figure 17 Active zone set data window