HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class User Manual
Page 61
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide
61
Status
Operational State
Switch operational state: Online, Offline, Diagnostic, Down
Administrative State
Current switch administrative state
Configured Admin State
Switch administrative state that is stored in the switch configuration
Beacon Status
Beacon status. Switch LEDs are blinking (On) or not (off).
Reason for Status
Additional status information
Temperature
Internal switch temperature °C
Fan 1 Status
Not applicable.
Fan 2 Status
Not applicable.
Fan 3 Status
Not applicable.
Power Supply 1 Status
Switch power status
Power Supply 2 Status
Not applicable.
Temp Failure Port Shutdown
Port shutdown status when failure temperature is exceeded.
Warning Temperature
Temperature threshold (65° Celsius) above which a warning
condition alarm is generated.
Failure Temperature
Temperature threshold (70° Celsius) above which a failure condition
alarm is generated.
Diag Status
Diagnostic status
Diag Fault Code
Not applicable.
Test Status
Not applicable.
Test Fault Code
Not applicable.
Network
IP Address
Internet Protocol address
Subnet Mask
Mask that determines the IP address subnet
Gateway
Gateway address
SNMP Enabled
SNMP enabled or disabled.
Broadcast Support
Broadcast support status. Broadcast support is enabled (default) or
disabled.
NTP Client Enabled
Enabled or disabled. Allows for switches to synchronize their time to
a centralized server.
NTP Server Address
The IP address of the centralized NTP server. Ethernet connection to
NTP server is required.
Use Front Port
Not applicable.
Table 8
Switch data window entries (Continued)
Entry
Description