HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 41)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 41
•
Click a zone, zone set, or port icon.
• Right-click to select a zone set or zone, and open the corresponding popup menu.
• Hold down the Shift key while clicking several consecutive icons.
•
Hold down the Control key while clicking several non-consecutive icons.
Using tool bar buttons, popup menus, or a drag-and-drop method, you can create and manage zone sets
and zones in the zoning database.
Table 6 describes the zoning tool bar operations.
Use the Edit Zoning dialog to define zoning changes, and click
Apply to open the Error Check dialog.
Click Error Check to check for zoning conflicts, such as empty zones or zone sets. Click Save Zoning to
implement the changes. Click Close to close the Error Check dialog. Click Close in the Edit Zoning dialog
to close the Edit Zoning dialog.
Table 6 Edit zoning dialog tool bar buttons and icons
Button/Icon Description
Create Zone Set button — Create a new zone set
Create Zone button — Create a new zone
Add Member button — Add selected port/device to a zone
Remove Member button — Delete the selected zone from a zone set,
or delete the selected port/device from a zone
Copy button — Copy selected zoning items to clipboard.
Paste button—Paste clipboard items to selected zoning item where
applicable.
Switch port icon — Not logged in
Switch port icon — Logged in
NL_Port (loop) device icon — Logged in to fabric
NL_Port (loop) device icon — Not logged in to fabric
N_Port device icon — Logged in to fabric
N_Port device icon — Not logged in to fabric