HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 56)

56
Removing a RADIUS server
Removing a RADIUS server, disables the remote authentication of devices or users over the network.
Figure 23 RADIUS Server Information dialog—Remove Server tab page
To remove a RADIUS server:
1. Select Switch > Radius Servers in the faceplate display.
2.
Click the
Remove Server tab in the Radius Server Information dialog shown in
Figure 23 .
3. Select the server to be removed in server list at the top of the dialog.
4. Click Remove Server to remove the server.
5.
Click
Close to close the Radius Server Information dialog.