HP Scitex FB950 Printer series - Manual (Page 99)

Optional auxiliary
power for vacuum
system Supplied 24 volt DC power supply with universal adapters, connected from the auxiliary power jack
on the vacuum/pressure assembly to one of the following:
● Wall outlet — 100-240 VAC, 50/60 Hz, provides temporary power to the vacuum system when it
is necessary to remove power from the printer for service.
● UPS — customer-supplied uninterruptable power supply, output 100-240 VAC, 50/60 Hz,
minimum of 15 watts of power, provides battery backup to the vacuum system in the event of a
power failure. UPS is connected to the electric wall outlet.
Energy consumed per
hour of operation ● Sleep/idle (lamps off): 0.74 kWh
● Printing 6x6, Production Mode, low lamps: 3.31 kWh
● Printing 6x3 Billboard Mode, high lamps: 4.67 kWh
Printing technology 12 piezo-electric inkjet printheads, variable drop size, 192 nozzles per printhead
Resolutions 1200 x 600 dpi, 600 x 600 dpi, 600x300 dpi (as supported by the RIP)
Ink HP Scitex FB250 Ink, 6-color (CMYKlclm) flexible UV cure inks, off-head ink system.
Curing system Dual carriage-mounted 550-watt shuttered UV lamps.
Vacuum/pressure
system Nominal relative vacuum: 9.3 mm Hg (5.0 in H
2
O)
Maintains negative relative pressure at the printheads and provides air pressure for purging. Since
relative pressure is maintained, the printer can be operated at various altitudes above or below sea
level without adjustments to the system.
Media handling Vacuum belt media drive for easy loading and accurate media feeding.
Front and rear roller tables support rigid materials up to 250 cm (98.4) in wide and 203 cm (80 in) long,
56.7 kg (125 lb) in weight.
A second set of roller tables (optional) extends the support of rigid materials up to 381 cm (150 in)
long.
Optional Supply & Take-up system supports up to 2.5 m (98.5 in) wide roll-fed media on 7.6 cm (3.0
in) cores, with a maximum diameter of 19 cm (7.5 in).
Maximum media
thickness 64 mm (2.5 in)
Maximum print width 250 cm (98.4 inches)
Edge-to-edge printing capable in the width and length of rigid media.
Maximum print length
(rigid media) 1016 cm (400 inches)
Minimum printable
rigid sheet size Width: 15 cm (6 in)
Length: 23 cm (9 in)
Software features Touch screen with graphical interface.
Automatic calibration and detection/substitution of missing jets.
Media Wizard stores operational parameter sets by media type for subsequent recall. Automatic edge
detection and media positioning.
Automatic head clearance above media.
Stored Jobs feature stores print jobs on the printer for reprinting.
Table A-1 Specifications (continued)
ENWW Specifications 93