Menus, Calibrate printer – HP Scitex FB950 Printer series User Manual
Page 49
Menus
The printer’s less-often used functions are accessed via the menus. The printer has these menus and
functions:
●
●
●
●
●
●
Calibrate Printer
To display this menu, press the Calibrate button on the Front Page screen. For instructions on using
these options, see Chapter 4,
●
Auto Calibrations — see
for instructions.
◦
Auto Bidi Calibration — ensures that every working jet fires a pixel at precisely the same
location, in both directions of travel
◦
Auto H2H Calibration — aligns the printheads relative to each other
◦
AutoJet Calibration — locates and substitutes missing jets for working jets
◦
Full AutoSet — runs AutoJet, AutoBiDi, and AutoH2H in sequence
◦
AutoSet Summary — when enabled, a table of the results of the Full AutoSet calibration is
printed after the AutoSet test patterns. When you enable the AutoSet Summary, you can show
or hide the detailed calibration data.
●
Manual Calibrations — allows you to calibrate the printer visually, without the printer’s digital
imaging sensor. Inaccurate judgments by the operator during these tests could result in
substandard output. See
Manual calibrations on page 54
for instructions.
◦
Manual Bidi Registration
◦
Printhead X Calibration
◦
Manual Jet Mapping — the manual version of AutoJet
◦
Jet Status Lines — prints the Manual Jet Mapping pattern without running the calibration
◦
Media Feed Calibration
ENWW
Menus
43