HP Scitex FB950 Printer series User Manual

Page 79

Text mode
Original mode

Clean and grease the service station wiper slide rails
(monthly)

Cleaning and lubricating the wiper rails keeps the wiper motion moving smoothly for best cleaning
performance.

To access the service station, move the table away from the input side of the printer and access
the wiper and wiper rails from the user-end as shown in the photo below.

Using a lint-free cloth, clean both of the wiper rails (A and B in the photo below) on both sides of
the wiper carriage (C).

NOTE:

For clarity, the service is shown without the end enclosure installed. However, the

cleaning and lubrication can be done easily without removing the enclosure.

Apply a dab of grease (supplied) onto a cotton swab.

ENWW

Clean and grease the service station wiper slide rails (monthly)