HP Scitex FB950 Printer series - Manual (Page 94)

Drain waste ink from service station (quarterly)
Waste ink accumulates in the service station until drained. Dispose of the collected ink according to
local regulations.
1. Place the waste ink jug (included with the printer) beneath the waste ink spigot, under the media
drive belt at the service end of the printer.
2. Turn the spigot (A in the photo below) to the open position
3. After the waste ink has drained, turn the spigot to the closed position
CAUTION: The drain spigot must remain closed during printing and service station use. An open
spigot affects the vacuum level in the service station and will degrade service station performance
if left open.
88 Chapter 5 User cleaning ENWW