HP Scitex FB950 Printer series - Manual (Page 98)

Specifications
Table A-1 Specifications
Dimensions
(assembled) Width: 406.4 cm (160 in)
Height: 154.9 cm (61 in)
Depth without tables: 121.9 cm (48 in)
Depth with tables: 325.1 cm (128 in)
Weight (assembled) Printer without tables: 684 kg (1507 lb)
Tables only: 68 kg (150 lb)
Operating conditions Temperature: 20–30° C (68–85° F )
Relative Humidity: 20–80%, non-condensing
Storage conditions Temperature: -34–49° C (-30–120° F)
Relative Humidity: 10–80%, non-condensing
Agency compliance Safety: CE, UL, c-UL
Emissions: FCC-A, CE, MIC
Immunity: CE
Electrical power Power used: 200-240 VAC, three phase (3 Φ), 50/60 Hz, 12 Amps maximum.
Required electrical
circuit (North America/
Japan)
With utility-supplied 3–phase power: 200-240 VAC, 20 Amps, 3 Φ, with NEMA L21-20R locking wall
receptacle
With 60 Hz 1–phase power: 200-240 VAC, 20 Amps, 3 Φ, 60 Hz, with NEMA L15-20R locking wall
receptacle and “Phase Perfect” Digital Phase Converter Model DPC-A10
Required electrical
circuit (Europe)
200-240 VAC, 16 Amps, 3 Φ, 50 Hz, with 5-pin IEC 60309 wall receptacle
Required power cord ● Part No. 0506213 North America (UL/CSA approved), length 4 m (13 ft), requires FRM part
number 0901565 if using phase converter (see Site Preparation Guide, part number 0706456);
OR
● Part No. CH109–50001 Europe (Harmonized), length 6 m (20 ft)
92 Appendix A Specifications ENWW